1、 Application ：

ASE31 construction drilling rig is used for drilling anchor holes in deep base pit of high building, anchor and reinforce side-slope for water conservatory project, water power station project, railways and highways. Especially used for drilling anchor holes in high position side-slope protection and drainage holes.
2、Features:

1) ASE40 drilling rig is a full hydraulic operated top drive power head drill with strong drilling capability and low energy consumption.

2) It is composed of the main set, control panel and pump which are connected together with flexible joint. So it features simple in structure, good disassembly and convenient to mount and transport.

3) Transmission, built in the top drive power head, has two speed range ― high and low. It can meet the requirements of both DTH hammer drilling and carbide bit drilling.

4) Hydraulic part is an international famous brand product which ensures drilling rig's high reliability and permanence stability.

1) Hole depth 45 -35 m
2) Hole diameter ÿ76 -120 mm
3) Drilling rod Diameter×Length ÿ50×1000 mm ÿ73×1000 mm
4) Hole angle range 0-360°
5) Output speed of top drive power head 35/64 r/min
6) Output torque of top drive power head 1200 Nm
7) Feeding stroke of top drive power head 1200 mm
8) Maximum lifting capacity of top drive power head 30 kN Maximum thrust force of top drive power head 15 kN

9) Motor power 15 kW
10) Weight approx. 450 kg
11) Weight of the heavies component 200 kg
12) Overall dimension 2700×1150×1400 mm